Gearboxes

  • WORM and WHEEL GEARBOX

    catalogue DSG10

    pages 78 to 95


  • low ratio 5-1 worm wheel gearbox

    The introduction of a ultra low ratio reduction of 5:1 has been introduced into the worm gearbox range


  • INCH worm/wheel GEARBOX

    INCH dimension worm gearbox

    to suit NEMA electric motors


  • worm wheel GEARBOX DOUBLE / DUAL OUTPUT

    single input worm , double / dual  output wheel.

    rated from 0.75Kw upto 4Kw


  • spiroid DAVALL SPIRADRIVE

    low backlash gearbox

    catalogue DSG10

    pages 98 to 107


  • MICRO planetary gearbox

    MICRO gearheads [motor ready]


  • REP planetary gearhead

    precision series


  • EP commercial planetary gearhead

    standard series


  • SPIRAL BEVEL - HELICAL GEARBOX

    The gearbox assembly has a rhobust, fully machined, fully sealed cast iron housing. Gearing reduction starts with matched sets of Gleason spiral bevel gears, case hardened. The drive is then taken through a second and / or third reduction (as required) helical gears in case hardened steel. High load taper roller bearings are used on all shafts (except hollow input, when angular contact ball as used) to optimise the radial and axial loads capacity. The option of no backdrive (one way bearings) is available, when only one direction of drive rotation is desired.


  • SPIRAL BEVEL GEARBOX aluminium case HIGH RATIO 1:1, 2:1, 2.5:1, 3:1, 5:1, 10:1


  • SPIRAL BEVEL GEARBOX steel case, high torque

    catalogue DSG10

    pages 147 to 152


  • SPIRAL BEVEL GEARBOX aluminium case "T" type


  • SPIRAL BEVEL GEARBOX hollow output


  • SPIRAL BEVEL GEARBOX manual reverse

    spiral bevel gearbox, with handle to reverse output direction [adjustment performed at rest]


  • SPIRAL BEVEL GEARBOX multi shaft, multi gear

    3 or 4 gear gearbox


  • HELICAL GEARBOX industrial (co-axial shaft)

    catalogue DSG10

    pages 158 to 163


  • HELICAL GEARBOX industrial (parallel shaft)

    6 unit sizes - single, double and triple stage reduction. 


  • HELICAL GEARBOX agricultural (parallel shaft)

    catalogue DSG10

    page 157


  • SPUR GEARBOX agricultural (parallel shaft)

    catalogue DSG10

    page 156


  • STAINLESS STEEL GEARBOX SPIRAL BEVEL "T" type

    power rated 0.12 to 6.5Kw 

    torque rated 2 to20Nm

    sealed for life

    food safe lubricant (on request)


  • STAINLESS STEEL 1STAGE HELICAL GEARBOX

    Stainless steel 1 stage helical gearbox, either as stand alone or as a prime reducer for worm wheel gearboxes


  • STAINLESS STEEL GEARBOX WORM and WHEEL

    power rated 0.12 to 4.0Kw 

    torque rated 15 to 850Nm

    sealed for life

    food safe lubricant (on request)


  • STAINLESS STEEL GEARBOX HELICAL (co-axial)

    power rated 0.12 to 4.0Kw 

    torque rated 20 to 500Nm

    sealed for life

    food safe lubricant (on request)